How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian
Brian, Architect
Category: Home Improvement
Satisfied Customers: 2153
Experience:  Licensed Architect- 17 years, L.E.E.D. AP
6457309
Type Your Home Improvement Question Here...
Brian is online now
A new question is answered every 9 seconds

I'm trying to take paint off my concrete shop floor, it was

Customer Question

I'm trying to take paint off my concrete shop floor, it was painted with a latex porch and floor paint (rustoleum) 5 years ago, starting to flake up and looks bad, tried a buffer with a carbide tip blade, worked so so, tried stripper, just ended up melting into pores, now trying a Soda/Abrasive Blaster, again so so. If I get the flaking paint up can I repaint with something else? Or do you have any suggestions
?
Submitted: 1 month ago.
Category: Home Improvement
Expert:  Rick replied 1 month ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. If my initial response doesn’t answer your question then let me know and we can continue our conversation.

Best option is 2 part epoxy floor paint. Rustoleum makes a good version

Customer: replied 1 month ago.
I tried that years ago on garage floor etched it with muratic acid. About a year after it started coming up where vehicle tires set. Wasn't too pleased
Expert:  Rick replied 1 month ago.

The current products are much improved. You could try the 1 part products but they don't seem to stand up to abuse as well.

Related Home Improvement Questions