How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Machinc Your Own Question
Machinc
Machinc, General Contractor
Category: Home Improvement
Satisfied Customers: 837
Experience:  Has written home improvement articles since 2008. Earned South Carolina Residential Builders License in 1991.
75209918
Type Your Home Improvement Question Here...
Machinc is online now
A new question is answered every 9 seconds

My Mikita high pressure blaster HW112 has lost pressure what

Customer Question

My Mikita high pressure blaster HW112 has lost pressure what can I do to fix ot
Submitted: 6 months ago.
Category: Home Improvement
Expert:  Machinc replied 6 months ago.
There are saveral things to check
Expert:  Machinc replied 6 months ago.
1: check fir clogged nozzle
2: remove spray hose and check
for clogged screen at pump connection
3: check pump for leaks
4: check if punp is clogged i
Hot to touch , unusual sound ,
Flush with fresh water.NOTE: If unit ( pumo) was run without water it could be damaged and have low pressure.
Expert:  Machinc replied 6 months ago.
If still not working after 1-4 it should be checked by a professional unless you are comfortable taking the unit apart yourself.
Expert:  Machinc replied 6 months ago.
Note: there is also a filter in the wand
Expert:  Machinc replied 6 months ago.
http://www.toolspareparts.com.au/makita-hw112-spare-parts.html
Expert:  Machinc replied 6 months ago.
This is a link for spare parts and a diagram than can be helpful for locating areas that may be clogged

Related Home Improvement Questions