How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian
Brian, Architect
Category: Home Improvement
Satisfied Customers: 2153
Experience:  Licensed Architect- 17 years, L.E.E.D. AP
6457309
Type Your Home Improvement Question Here...
Brian is online now
A new question is answered every 9 seconds

Have a 24'' kenmore wall oven, sitting not in use a while,

Customer Question

have a 24'' kenmore wall oven, sitting not in use a while, f-1 shows up on screen.
Submitted: 5 months ago.
Category: Home Improvement
Expert:  Daniel Zingarelli replied 5 months ago.

The "F1" fault code indicates one of the following possible failures:

Shorted keypad which is part of the Electronic Oven Control (EOC)

Failed Electronic Oven Control (EOC)

Oven temperature sensor is bad (this is located inside the oven cavity at the upper left rear corner). The oven sensor should be disconnected and tested for resistance and compared with the "RTD" scale.

You can try resetting the range by disconnecting it from the outlet or switching off the circuit breaker of the home for 10-20 minutes then restore the power. If the reset doesn't work your range may have one of the above failures.

If you do not feel comfortable performing this task I would strongly suggest scheduling service at 1-***-***-**** to have a technician diagnose and repair your range.