How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brian Your Own Question
Brian, Architect
Category: Home Improvement
Satisfied Customers: 2153
Experience:  Licensed Architect- 17 years, L.E.E.D. AP
Type Your Home Improvement Question Here...
Brian is online now
A new question is answered every 9 seconds

The foil-based cabinet door facing on two doors has partly

Customer Question

The foil-based cabinet door facing on two doors has partly de-laminated on the bottom edge due to the heat from the gas range below. I'm trying to purchase replacement doors from the supplier - assuming he can still find the product. If I can't find it, it might look presentable if I flip the door over and re-laminate the covering to the substrate. What's the best way to do this? Epoxy, Elmers, super glue, heat, what?
Submitted: 6 months ago.
Category: Home Improvement
Expert:  Eddie replied 6 months ago.
Hi ........if you could upload a few pictures it would help out considerablythankseddie
Customer: replied 6 months ago.
Sure. Give me a day, because have to get it from the property it's on.
Expert:  Eddie replied 6 months ago.
no problem.......thanks

Related Home Improvement Questions