Recent Feedback
when my kenmore washer hits the spin cycle, there is a clicking noise and no spin
Already Tried: opened the cabinet saw no broken parts
Hello and thank you for your question. Do you have the model number? It sounds like the belt is broken.
(NNN) NNN-NNNNNo belts
Are you sure that is the model number I searched Kenmore's database and did not find that model number?
110207020990
No that one isn't working either. Is it a top loading washer or front load washer?
Top load
Ok Than it sounds like to me is your lid switch is defective.If the lid switch is defective, your washer can't spin. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washer to get to the switch. If it's defective, you need to replace it.
If it was the lid switch, the transmission would not click
The clicking is the lid switch failing to let the washer spin. This is a common problem and the least expensive to fix. Lets start with that and if that doest work we will move forward from there.
Experience: I have over 12 years experience in General Building Construction
I replaced the switch, But Washer will still not spin. It does drain only with a loud noise.