There are special adapters made for a drill that will cut up to an 8" hole. I believe you would be best to use a jig type saw. There are adapters made for them that will allow you to cut a perfect large hole.
If you have additional questions, please ask, before you accept this answer.If my answer is unacceptable in any way, please do not accept my answer and let me know. I will do my best to get you an acceptable answer. If you were happy with answer to your question, please click the green accept button. After making the accept, please leave positive feedback on Just Answers when you get a moment. Feedback can be left by using the link below. http://www.justanswer.com/leave_feedback.asp Thanks again!Joe Booker******** Thanks for using Just Answer ********