How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., service manager
Category: Heavy Equipment
Satisfied Customers: 27463
Experience:  30 years exp. with diesel engines, heavy equipment and forklifts, including lp forklifts
30244710
Type Your Heavy Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My secondary air pressure gauge is not moving have had a

Customer Question

hi my secondary air pressure gauge is not moving have had a look at the compressor seems to be working looked for leaks gauge not going primary gauge is on
JA: What is the complete model and serial number of your machine?
Customer: its on the truck
JA: Anything else you want the equipment mechanic to know before I connect you?
Customer: what is the cost
JA: You just pay a $5 deposit now and the rest only when you get a reply from the Heavy Equipment Mechanic. All of this is 100% satisfaction guaranteed, so you can get a refund if you're not happy for any reason.
Customer: ok
Submitted: 4 months ago.
Category: Heavy Equipment
Expert:  Curtis B. replied 4 months ago.

Welcome to JUST ANSWER heavy equipment. With years of experience, I look forward to doing my best to help.

Expert:  Curtis B. replied 4 months ago.

Secondary gage moniters the secondary air tank. Tank sender may be bad, or the gage can broken. Do the air brakes work? Then you have pressure in the secondary tank. So gage or sender, or wire is off the sender!

Customer: replied 4 months ago.
Where is the sender located, is it on the front of the secondary tank
Expert:  Curtis B. replied 4 months ago.

Typically on the connections to the tank. Single pressure sender.

Customer: replied 4 months ago.
we dont want you to call us yet as we will trouble shoot the sender first we are going back to the yard where our truck is located thankyou
Expert:  Curtis B. replied 4 months ago.

Yes, call not needed!

Expert:  Curtis B. replied 4 months ago.

I see question is still open, did you find the problem? Please rate to close.