how to remove front drums from a 1999 Hino FE2620
Model: FE 2620
Hi I'm Wayne, I will help you with this,Good EveningI see you had 6 Questions, but only 3 Accepts OK, jack up front of truck, back off the brakes all the wayremove the oil /dust cover remove cotter pin , if equipped if not knock back flat washer bent over outter nut remove outer, remove the washer, then inner nut remove wheel................
we are on a hino old style brakes like on gm rear brakes air over hyd
Hi Sorry for the delay What is your question, I explained how to do this , Air over /hydraulic, is like a mid liner Let me know what you need Please
how to back off brakes
it has two brake cylnders single piston on front axle per wheel
Hello, I am Sorry, did not think of that On the Backing plate , you will see a slot, has star wheel, turn that opposite of axle , to loosenneed a speical Tool, or use a screwdriverwayne40988.0861189815
we have tried that seem to be hung can tighten brake but will not back off tried pushing in on catch but with no results.
Hello,OK, if yo can not back off by the star wheel, I taking it you are saying it is stripped , this is very uncommon, you just need to force it, to back off, other wise use pry bars to move wheel off, spray a oil in there , on shoes this will help, slide offif both sides are doing this, you are not backing it off all the waythey will stop, Freeze, and force to loosen
is their a lock in there at the tooth wheel.
Hi Yes , a little bar , that goes across the wheel to keep it from turning not to unadjust you have to force past this Wayne
Good Morning How did this work out for you Wayne
Sorry for the delay.I had consulted with Hino on this truck and there was a slot for a rod to be inserted.to assist in backing off brakes.The piston assembly turned out to be bad as i was told this seem to be a common problem when owners let the front brakes go to far out of adjustment.
Hello,That is what I had mentioned , about inserting a tool into the slot, Glad you have it going, Adjust your brakes every 5000 miles Wayne
34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.