Hi, I'm trying to wire up a 7 pin trailer plug to a Hino FB. I can't seem to get the brake lights to come on or the brakes on the trailer to work. All running lights and turn signals work. The Hino uses a separate wire for the brake and turn signals. So, there is a wire for the brake, a wire fore left, a wire for right and the running lights wire. On the dash in the cab is the brake control. I get a green light but that is all. Everything appears to be wired according to the drawings I can find but I suspect the extra brake light wire is causing the problem. ???
Hi I'm Wayne, I will help you with this,Good Eveningyou are not,never get it to work Hino, Isuzu, meresdes , so onthey do not work a s American madeyou need to get a conversion box , and hook that in line it will install before the plug at your back end +if this helped you , please HIt Accept, as this is the only way I get Paid if not get Back to me
Hi Wayne, Okay, I'll get a conversion box and let you know how it worked out. Thanks!RonB.
Morning Ron,OK Thank you Please don't for get to hit Accept, if this helped you Wayne
34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.
Hi Wayne, The problem I had was with both the lack of a conversion box, as you suggested, and a faulty control box in the cab. All is well now. Thanks for your help.RonB.