How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Buddy Your Own Question
Buddy
Buddy, Technician
Category: Heavy Equipment
Satisfied Customers: 730
Experience:  20 years experience. Freightliner tech for last 14 years
19040450
Type Your Heavy Equipment Question Here...
Buddy is online now
A new question is answered every 9 seconds

ecm fuse or breaker located on a 2000 freightliner classic

Customer Question

where is the ECM fuse or breaker located on a 2000 freightliner classec
Submitted: 4 years ago.
Category: Heavy Equipment
Expert:  Buddy replied 4 years ago.

Buddy :

Hi and welcome to JA. I am Buddy, and i will try and help you out. The ecm fuse is normally located in the battery box or behind it. You should see a smaller wire coming from one of the batteries on the hot post, that wire should take you to the fuse. If this fuse is blown or if you have a power harness issue, your check engine light and stop engine light will not come on when you turn the ignition on. The check engine light and stop engine light should come on for 5 seconds when you turn ignition on, if you do not see the come on, it is more then likely ecm fuse or power harness issue. If you have anymore questions, just ask. Thanks

JACUSTOMER-3ztr5v8l- : Thanks man...appreciate it
Buddy :

If you need anything else, just reply back. Thanks

Related Heavy Equipment Questions