How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka - Moose) Your Own Question
Chris (aka - Moose)
Chris (aka - Moose), Technician
Category: Heavy Equipment
Satisfied Customers: 45071
Experience:  16 years of experience
2499435
Type Your Heavy Equipment Question Here...
Chris (aka - Moose) is online now
A new question is answered every 9 seconds

TORQUE SPECS FOR CHANGING INJECTORS C12 CAT

This answer was rated:

TORQUE SPECS FOR CHANGING INJECTORS C12 CAT

Hello, I'm Chris.
I will do my best to answer your question fast and accurate using the info you have provided. Thanks for visiting Just Answer.

 

The injector hold down bolt torque is 27 ft lb max

Customer: replied 4 years ago.
NEED TORQU SPECS. FOR ROCKER ARM ASSEMBLY'S AND JAKE PARK

After you have set up the valve lash, the rocker arm locknut is also the same torque as above. 27 ft lb max

 

For the brake, follow the images below.

graphicgraphicgraphicgraphicgraphicgraphicgraphic

Customer: replied 4 years ago.
AFTER CHANGING INJECTORS AND ROCKER ASSEMBLY" S IS THIER ANY MORE ADJUSTMENTS THA WE MAY HAVE TO DO? THANK'S
Just verifying you have the valve lash correct on the rocker arms is the only other thing to setup correct.
Customer: replied 4 years ago.
IS THIER ANY TORQUE VAVLE LASH REQUIRESMENTS OR ANY DIAGRAMS THAT YOU CAN E-MAIL ME ON THIS ? THANK'S

Sure see the images below, this should get you all fixed up, please press accept if I have been helpful.

graphicgraphic

Chris (aka - Moose) and other Heavy Equipment Specialists are ready to help you