How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Joe Your Own Question
Joe, Technician
Category: Heavy Equipment
Satisfied Customers: 796
Experience:  20-plus Yrs. Master Mechanic , Specializing in Cummins and Cat midrange , RV's and Commercial bus.
Type Your Heavy Equipment Question Here...
Joe is online now
A new question is answered every 9 seconds

2009 sterling with a isb 240 cummins one..normal operating..FAULTY

Resolved Question:

I have a 2009 sterling with a ISB 240 Cummins one of the codes tells me that (engine turbo 1 speed data valid but below normal operating range-moderately severe level) second code tells me (ECM CRITICAL INTERNAL FAILURE-FAULTY INTELLIGENT COMPONENT OR DEVICE). With these codes I was wondering what could be the problem changed sensor on the turbo stayed the same. When I have my computer connected and I press more info it wants to shut down.
Submitted: 4 years ago.
Category: Heavy Equipment
Expert:  Joe replied 4 years ago.
Hello , my name is Joe

From what you describe - Cummins fault 111; It seems like you have a bad ECM.

This fault code is triggered when the internal ECM diagnostics detect a read or write error internal to the module.

This fault code can only be caused by an internal ECM problem. Repairs are not possible for the ECM.


Joe and other Heavy Equipment Specialists are ready to help you

Related Heavy Equipment Questions