How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask catmastertech Your Own Question
catmastertech
catmastertech, Technician
Category: Heavy Equipment
Satisfied Customers: 2331
Experience:  19 years Cat, 3 years Case
11546476
Type Your Heavy Equipment Question Here...
catmastertech is online now
A new question is answered every 9 seconds

Forklift..Perkins..cylinder head bolt torque specs

This answer was rated:

I have a 2005 Princeton PB-50 forklift with a Cat/Perkins 3024C engine. Need to know the valve lash specs and cylinder head bolt torque specs. Help!

Donnie :

Do you have the engine serial number?

Donnie :

I think they are all the same, here is what I have found.

Donnie :

(A) Exhaust valve


(B) Inlet valve



Bore ... 84 mm (3.3 inch)


Stroke ... 100 mm (3.9 inch)


Displacement ... 2.216 L (135 in3)


Cylinder arrangement ... In-line


Type of combustion ... Indirect injection


Compression ratio ... 23.3:1


Number of cylinders ... 4


Valves per cylinder ... 2


Valve lash


Inlet valve ... 0.2 mm (0.0078 inch)
Exhaust valve ... 0.2 mm (0.0078 inch)

Firing order ... 1, 3, 4, 2


When the crankshaft is viewed from the front of the engine, the crankshaft rotates in the following direction. ... Clockwise


When the camshaft is viewed from the front of the engine, the camshaft rotates in the following direction. ... Clockwise


The front of the engine is opposite the flywheel end of the engine. The left side and the right side of the engine are determined from the flywheel end. Number 1 cylinder is the front cylinder of the engine.

Donnie :

OOPS -I should have entered picture first.

Customer:

serial number PO4158

Donnie :

Most begin with 424.

Donnie :

Some are G4P.

Donnie :

Here is the cylinder head spec's. 3024C head <<<click here.

Customer:

how about G4P04158

Donnie :

OK, let me double check.

Donnie :

Yep, it looks the same as the information I have sent you.

Customer:

Excellent, thankyou!

Donnie :

Your Welcome, thanks for using JustAnswer!

catmastertech and other Heavy Equipment Specialists are ready to help you