How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., service manager
Category: Heavy Equipment
Satisfied Customers: 25638
Experience:  30 years exp. with diesel engines, heavy equipment and forklifts, including lp forklifts
Type Your Heavy Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

electronic ignition for bobcat 610 wisconsin 4cyl

Customer Question

electronic ignition for bobcat 610 wisconsin 4cyl
Submitted: 5 years ago.
Category: Heavy Equipment
Expert:  Curtis B. replied 5 years ago.
Welcome to JUST ANSWER heavy equipment. With years of experience, I look forward to doing my best to help.Here is just one kit available.
Curtis B. and 2 other Heavy Equipment Specialists are ready to help you
Customer: replied 5 years ago.
What about coil
Expert:  Curtis B. replied 5 years ago.
The coil does not need to be changed. It can be, but not necessary. Thank you.
Customer: replied 5 years ago.
Need coil part number got to replace the old one has no numbers on it
Expert:  Curtis B. replied 5 years ago.
Just buy a 12 volt coil with internal resistor for electronic ignition. Napa has them. Or take old one in. I don't have part number for Wisconsin coil. sorry.

Related Heavy Equipment Questions