How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Heavy Equipment
Satisfied Customers: 9196
Experience:  34 years experiance as engine rebuild and problems.Thermo-King repair and trouble shooting.
6825259
Type Your Heavy Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

Isuzu: need to know injection timming for 4hg1 engine..diesel..degrees

Resolved Question:

need to know injection timming for 4hg1 engine isuzu diesel front timming cover has only degree strokes no degree numbers need to know which stroke represents 9 degrees btdc
Submitted: 5 years ago.
Category: Heavy Equipment
Expert:  Wayne replied 5 years ago.
Hi I'm Wayne,
I will help you with this,
WHEN I timed the D201, Isuzu it was always on Cyl # XXXXX at 9 degree
9 Degree BTDC, on # XXXXX cylinder, They are all timed the same

If This helped you, please hit Accept, if not get back to me
Customer: replied 5 years ago.
need to know which mark on the balancer is 9 degrees
Expert:  Wayne replied 5 years ago.

Morning,

You should have a access cover 2 bolts on timing cover
Remove that and rotate engine till you line up the "O" at the pointer on cover, if not on #1 ,rotate engine again, till this XXXXX XXXXXnes up, then you will be on the correct timing to install pump

Wayne
Wayne and other Heavy Equipment Specialists are ready to help you