How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bobby Long Your Own Question
Bobby Long
Bobby Long, Technician
Category: Heavy Equipment
Satisfied Customers: 380
Experience:  16 Years experience in Bobcat, And International tractor repair
Type Your Heavy Equipment Question Here...
Bobby Long is online now
A new question is answered every 9 seconds

t300 bobcat tracks locked,will not move. also have 3 codes

Resolved Question:

t300 bobcat tracks locked,will not move.
also have 3 codes :06-13[engine speed no signal,07-21 hydraulic oil tem.out of range high,21-03[glow plug error off.
it run great.
need location of parts and description ,and what to do,to fix
Submitted: 5 years ago.
Category: Heavy Equipment
Expert:  Bobby Long replied 5 years ago.

Hello I'm Bobby and welcome to just answer.

I have a question for you. Does all 3 of these code come up in a row ever time you start it? Did this happen all at once?

Customer: replied 5 years ago.
i held the codes button,and found them
Customer: replied 5 years ago.

havent received an answer

Expert:  Bobby Long replied 5 years ago.

Hello again, Sorry for the delay.

I think you have a bad controller on the loader. 2 of the senders that you have putting out a code run off the 8 volt system from the controller. I have seen many controllers go bad giving a lot of codes but the sensors are not the problem. I hate to say this but your most likely going to have to take it to a bobcat dealer and have them hook it up to there computer to see whats going on with it . Hope this helps..

Bobby Long and 3 other Heavy Equipment Specialists are ready to help you

Related Heavy Equipment Questions