How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask daves71 Your Own Question
daves71
daves71, Fleet Manager
Category: Heavy Equipment
Satisfied Customers: 719
Experience:  35+years working on heavy equipment and heavy duty trucks
8067388
Type Your Heavy Equipment Question Here...
daves71 is online now
A new question is answered every 9 seconds

873 bobcat: blown..changed fuse and restarted..connector melted

Resolved Question:

Have an 873 bobcat that died while at idle 30amp fuse had blown, changed fuse and restarted but died again, fuse still ok but found a connector melted repaired it but seems I have no fuel when I try to start
Submitted: 6 years ago.
Category: Heavy Equipment
Expert:  daves71 replied 6 years ago.
Good Morning, what fuse was blown ?
Customer: replied 6 years ago.

Fuel 30amp

Expert:  daves71 replied 6 years ago.
Thanks, XXXXX XXXXX like the fuel cut off solenoid is having a problem. With the key on check for voltage of 5 to 8 volts on 1 wire to the solenoid and ground on the other wire.
Customer: replied 6 years ago.
if I have voltage and ground, replace solenoid?
Expert:  daves71 replied 6 years ago.
yes, if you have power and ground the solenoid is bad.You can check it once you remove it from the machine by grounding the solenid case and the wiring hooked up. with the solenoid removed, the engine should run as a test and can be shut down using the external fuel shut off lever.
daves71 and other Heavy Equipment Specialists are ready to help you

Related Heavy Equipment Questions