How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tj Your Own Question
tj, Mechanic
Category: Heavy Equipment
Satisfied Customers: 524
Experience:  10 years of john deere,agco,new holland,cummins
Type Your Heavy Equipment Question Here...
tj is online now
A new question is answered every 9 seconds

How to change the belts on a jonh deere 457 hay baler

Resolved Question:

how to change the belts on a jonh deere 457 hay baler
Submitted: 6 years ago.
Category: Heavy Equipment
Expert:  tj replied 6 years ago.

Hi there and welcome to JA. To do this it is real simple. raise the gate all the way then set the gate lock and then lower the gate to tighten the belts and then spin the pto over until the belt splice is under the gate then open the gate to release the tension on the belts remove the pin from the belt and then pin the new belt to the old and pull the belt through by doing this you will have the belt going the right direction.pull all the way through then remove the pin and install a new pin into the belt and release the gate lock and lower the gate and you are done


If you need any more help just ask

If you agree with my answer then please accept,feedback is also welcomed THANKS

tj and other Heavy Equipment Specialists are ready to help you

Related Heavy Equipment Questions