How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ebnel Your Own Question
ebnel
ebnel, Technician
Category: Heavy Equipment
Satisfied Customers: 282
Experience:  master certification diagnostics and repair
29754011
Type Your Heavy Equipment Question Here...
ebnel is online now
A new question is answered every 9 seconds

How hard is it to replace a front axle seal in a John deere

Customer Question

How hard is it to replace a front axle seal in a John deere 5410 4WD?
Can I get a diagram online showing the front axle and how to replace?
Thanks,
Don
Submitted: 6 years ago.
Category: Heavy Equipment
Expert:  ebnel replied 6 years ago.
Hello,which one of these seals is leaking?so I can get you correct info, graphicgraphic
Customer: replied 6 years ago.

I'm sorry let me rephase the question;

the seal that is leaking is the one around the front drive shaft on my 5410 4WD

John deere. it is leaking around the front drive shaft that comes out of the front pumkin.

Can you provide me with a diagram of the front drive shaft with seals and bearings?

Thanks,

Don

 

 

Expert:  ebnel replied 6 years ago.
Remove your drive shaft and use puller to remove #8 cover then remove seal #7, job is not very easy, Manual doesn't list tools needed to replace seal, may need to make piece of pipe to fit over drive shaft to reinstall seal and cover. graphic

Edited by ebnel on 2/19/2010 at 2:54 AM EST

Related Heavy Equipment Questions