How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask tj Your Own Question
tj, Mechanic
Category: Heavy Equipment
Satisfied Customers: 524
Experience:  10 years of john deere,agco,new holland,cummins
Type Your Heavy Equipment Question Here...
tj is online now
A new question is answered every 9 seconds

How to replace an water pump on a n14 cummins

Customer Question

how to replace an water pump on a n14 cummins
Submitted: 6 years ago.
Category: Heavy Equipment
Expert:  tj replied 6 years ago.

Hi there. The first thing to do is to loosen the serpintine water pump drive belt. Then you will need to drain the coolant from the radiator. Then depending on your engines clearance from the fan you should have enough room to remove the pump mounting bolts. After you drain the water then you will need to remove the bypass hose from the water pump. Then you will need to remove the four bolts on the right hand side from the lower radiatior hose adapter. Then remove the bolts on the front of the water pump and pull the pump out and reverse assembly. They are fairly easy to do.


If you need any more help just ask

If you agree with my answer then please accept Thanks feedback is also welcomed

tj and 2 other Heavy Equipment Specialists are ready to help you
Customer: replied 6 years ago.
how to remove the pully off the waterpump what size nutt that is
Expert:  tj replied 6 years ago.

Hi there the pulley should come with a new water pump. Is the pulley you are talking about above the crankshaft or to the drivers side?


Related Heavy Equipment Questions