How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka - Moose) Your Own Question
Chris (aka - Moose)
Chris (aka - Moose), Technician
Category: Heavy Equipment
Satisfied Customers: 112
Experience:  16 years of experience
Type Your Heavy Equipment Question Here...
Chris (aka - Moose) is online now
A new question is answered every 9 seconds

I have a John Deere 320 skidsteer that wont start. There are

Customer Question

I have a John Deere 320 skidsteer that wont start. There are no obvious problems . Fuel, hydraulic oil, engine oil, coolant, air filter etc. are OK. There are no obvious fuel leaks or oil leaks. There are no diagnostic codes or other alarms present. I've drained the fuel-water seperator and primed the fuel filter. When priming the fuel filter it does not seem to build up much resistance. Lastly it is stuck in a bad spot on a work site and I need to tow it out of the way. Can I bypass the hydraulics to tow it?
Submitted: 7 years ago.
Category: Heavy Equipment
Expert:  DEALERTECH37 replied 7 years ago.
hi there. sounds like you are in a pickle. Im KC, do you have any power, is it cranking? does the check engine light come on at key on?..Not sure if the hydraulicx can be bypassed or not..let me know..thank you,,,
Customer: replied 7 years ago.
Battery OK starter OK Turns motor at 210 rpm but wont start. No such bear on JD320 as a check engine light. It has a trouble shooting menu with diagnostic codes but no codes are showing.It has auto engine shutdown for three conditions; low engine oil pressure, engine coolant overheat and hydraulic oil overtemp, but none of those conditions exist.

Related Heavy Equipment Questions