How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gm Tech (Cam) Your Own Question
Gm Tech (Cam)
Gm Tech (Cam), GMC Mechanic
Category: GMC
Satisfied Customers: 1667
Experience:  GM Grand Master Technician 2007. 14 year experience.
10949255
Type Your GMC Question Here...
Gm Tech (Cam) is online now
A new question is answered every 9 seconds

I have a GMC 05 canyon 4x4 reg. cab. trying to remove rear

Customer Question

i have a GMC 05 canyon 4x4 reg. cab. trying to remove rear driveshaft rear to replace u goints. I removed the 4 bolts. dropped the back of the drive shaft but the front will not pull out of the trans/ t-case.
Submitted: 1 month ago.
Category: GMC
Customer: replied 1 month ago.
the slip yoke will move in and out about 1 1/2 inch but will not come all the way out. no center support
Expert:  Dan replied 1 month ago.

Hello my name is***** am an ASE Master Technician and I am glad to help you with your question.

Expert:  Dan replied 1 month ago.

Work it front to back it should slide out.

Customer: replied 1 month ago.
tried that
Customer: replied 1 month ago.
even tryed a hand winch
Customer: replied 1 month ago.
it will turn and go in and back out again about 1 1/2 inch but wont pull all the way out

Related GMC Questions