How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gm Tech (Cam) Your Own Question
Gm Tech (Cam)
Gm Tech (Cam), GMC Mechanic
Category: GMC
Satisfied Customers: 1660
Experience:  GM Grand Master Technician 2007. 14 year experience.
Type Your GMC Question Here...
Gm Tech (Cam) is online now
A new question is answered every 9 seconds

C0710 error, Tech2. 620000, Hummer h3, 2008, Yes. By myself.

Customer Question

C0710 error
JA: How many miles are on the car? Do you have scan tool or a code reader?
Customer: Tech2 . 620000
JA: What is the model/year of your GMC?
Customer: Hummer h3
JA: What year is your H3?
Customer: 2008
JA: Are you fixing your H3 yourself? What have you tried so far?
Customer: Yes. By myself. I have disconnected rack and got c0710 error. How to calibrate sensors ?
JA: Anything else you want the mechanic to know before I connect you?
Customer: No
Submitted: 18 days ago.
Category: GMC
Expert:  Greg replied 18 days ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 18 days ago.

Was the rack removed .

check the connection on the sensor clean with contact cleaner .


Expert:  Greg replied 18 days ago.

Steering that read 220 + or - means its disconnected . or fully to the right or left .

With the scan tool does the reading go from plus 220 to - 220 .

Most cases when you have this code the sensor is bad or the connection ,wiring short .

check and then please get back to me .


Related GMC Questions