How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag
rpmdiag, Tech and Instructor
Category: GMC
Satisfied Customers: 6887
Experience:  Since 1975
12769047
Type Your GMC Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

I tried to program new key for 07 Gm Yukon Denali, using the

Customer Question

I tried to program new key for 07 Gm Yukon Denali, using the existing key per manual instructions. Now the my vehicle will not do anything. What should I do?
JA: Is the key stripped or worn?
Customer: Negative
JA: What is the model/year of your GMC?
Customer: 07 Gm Yukon Denali
JA: What year is your GMC?
Customer: Gov
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: 2007
JA: Anything else you think the mechanic should know?
Customer: Just had a transmission installed by dealership
Submitted: 4 months ago.
Category: GMC
Customer: replied 4 months ago.
What email address do you have?
Customer: replied 4 months ago.
I tried to program newly cut key using the old key per manual instructions. The old key will no longer turn the vehicle on, nor will anything respond.
Expert:  rpmdiag replied 4 months ago.

Hi, welcome to Just Answer. I’m Ron and I’ll be helping you
today.
Before we get started though, Please understand that I don't know
your skill level or tools you have to assist us. Also understand that
I can't see, smell, hear, or touch the vehicle either, so patience is
appreciated. JA is a great Q/A site, but it does NOT replace a
repair shop.
My goal is to make you happy and get a great rating in return for
my time. Sometimes I have to give you bad news that I know you
didn’t want to hear, so please don’t shoot the messenger.

I attached the procedure for you from GM to program this key. If this doesn't work, then you may have a bad key reader in the steering column.

Thanks, Ron

Expert:  rpmdiag replied 4 months ago.

I'm following up to see if you have any more questions.

Thanks, Ron