How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gm Tech (Cam) Your Own Question
Gm Tech (Cam)
Gm Tech (Cam), GMC Mechanic
Category: GMC
Satisfied Customers: 1667
Experience:  GM Grand Master Technician 2007. 14 year experience.
10949255
Type Your GMC Question Here...
Gm Tech (Cam) is online now
A new question is answered every 9 seconds

I just received my Airbag Sensor Diagnostic Module back from

Customer Question

I just received my Airbag Sensor Diagnostic Module back from Myairbags.com. This is the module mounted under the drivers seat.. Do I need to disconnect the battery or anything special when I install it back into my Hummer H2 2005?
Mitch
Submitted: 6 months ago.
Category: GMC
Expert:  Genchi Genbutsu replied 6 months ago.
disconnect the battery and wait 2 minutes, then install the airbag module. Then reconnect and recheck if any codes are stored. There shouldn't be though as it's just plug n play. Let me know how it goes.
Customer: replied 6 months ago.
There should not be any codes stored since airbags.com is a service/company that supposedly resets the module back to factory settings and erases all codes. Am I correct? Are you familiar with this company?
Expert:  Genchi Genbutsu replied 6 months ago.
Am I correct? Yes.

Related GMC Questions