How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Nova Your Own Question
Dave Nova
Dave Nova, GMC Technician
Category: GMC
Satisfied Customers: 19450
Experience:  ASE Master Certification. GM World Class Certification
11042942
Type Your GMC Question Here...
Dave Nova is online now
A new question is answered every 9 seconds

how do i replace the power steering lines on a 1998 sierra

Resolved Question:

how do i replace the power steering lines on a 1998 sierra?
Submitted: 5 years ago.
Category: GMC
Expert:  Dave Nova replied 5 years ago.
Hello and thank you for using Justanswer. My name is XXXXX XXXXX I will do my best to help you with your GMC problem.

Which engine do you have in your Sierra?
Customer: replied 5 years ago.
5.7 withXXXXX
Expert:  Dave Nova replied 5 years ago.
Thanks for the information.

graphic

When a hose is reinstalled or replaced, the following points are essential:
  • Route hoses in the same position they were in before removal.
  • Route hoses smoothly; avoid sharp bends and kinking
  • After hoses are installed, check for leaks while the system is being bled.
  • Tighten the hose connections to 28 Nm (20 ft. lbs.)
Customer: replied 5 years ago.
do i need to remove the pump to attach the high pressure line? What is the easiest way to bleed the system
Expert:  Dave Nova replied 5 years ago.
The pump does not need to be removed to replace the high pressure line. sometimes it is easier to break the fitting loose by working from underneath with a wrench.

Open diagram below for bleeding procedure.

graphic
Dave Nova and 3 other GMC Specialists are ready to help you

Related GMC Questions