How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), GMC Mechanic
Category: GM
Satisfied Customers: 5783
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your GM Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

Driver door controls on 2003 Envoy. All dead. I pulled the

Customer Question

driver door controls on 2003 Envoy. All dead.
JA: Are you fixing your Envoy yourself? What have you tried so far?
Customer: I pulled the control panel. Checked all of the connections. Nothing hot or melted. no blown fuses
JA: Do all the fuses have the correct amperage for the circuits they're in?
Customer: yes
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 2 months ago.
Category: GM
Customer: replied 2 months ago.
Passenger side controls on the passenger door work. Drivers side...no windows, no mirrors, no locks, no seat choice.
Expert:  Ron replied 2 months ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 2 months ago.

Is everything on the drives door dead?

Customer: replied 2 months ago.
I pulled the panel out of the door and pulled all of the plugs. All the connections look okay and it doesn't look like anything has gotten hot/shorted/melted.
Customer: replied 2 months ago.
I also checked the connection between the door and dash. That connection also looks okay and it doesn't look like anything has gotten hot/shorted/melted.
Expert:  Ron replied 2 months ago.

The most common cause for this type of problem is in most cases caused by a failed driver door module/switch assembly. Are you able to do some test at the DDM?

Customer: replied 2 months ago.
I'm sorry. I can't troubleshoot right now. I appreciate your direction so far.
Expert:  Ron replied 2 months ago.

Like I said the common cause is usually a failed Drivers door module but it would be best to test it to be sure and if it dose turn out to be the cause the new unit will require programming. If you have someone who can help you with this I will provide you with the steps to check it as well as replacement steps. Let me now.

Customer: replied 2 months ago.
Thank you.
Customer: replied 2 months ago.
I have finished talking for now.
Expert:  Ron replied 2 months ago.

Okay thank you as well.