How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Roy Belding Your Own Question
Roy Belding
Roy Belding, ASE Certified Technician
Category: GM
Satisfied Customers: 4657
Experience:  Master ASE since 1980
3506196
Type Your GM Question Here...
Roy Belding is online now
A new question is answered every 9 seconds

07 G5 2.2 eco Replaced all timing comp. gears,

Customer Question

07 G5 2.2 eco Replaced all timing comp. gears, chain,guides,all plated links were aligned on chain, it has to be in time, now I have random misfire, also new ac plat. plugs. What created this? Was not there before.
Submitted: 3 months ago.
Category: GM
Expert:  Roy Belding replied 3 months ago.

good morning my name is ***** ***** I will assist

did you check the compression after installation???

Roy

Customer: replied 3 months ago.
Comp. before was.110 psi. on all 4, after still the same
,
Expert:  Roy Belding replied 3 months ago.

110 is low. did the old chain fail????

Roy

Customer: replied 3 months ago.
Did not fail, just rattled, was afraid it would break. I heard if you replace rings, its hard to get them to seat to cyl. Is this true?
Expert:  Roy Belding replied 3 months ago.

no, todays rings seat within 5 minutes of the engine running.

did you replace plugs and the ignition components???

Roy

Expert:  Roy Belding replied 3 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Customer: replied 3 months ago.
Installed 4 new AC plat. plugs, thats all
Expert:  Roy Belding replied 3 months ago.

ok, can you check the fuel pressure???

Customer: replied 3 months ago.
I can, will report back. Thanks.
Expert:  Roy Belding replied 3 months ago.

ok

Expert:  Roy Belding replied 3 months ago.

any news