How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), GMC Mechanic
Category: GM
Satisfied Customers: 5783
Experience:  GM Grand Master Technician 2007. 14 years experience.
10949255
Type Your GM Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

2008 gmc Sierra 5.3l. Shutdown, after fueling. Will start

Customer Question

2008 gmc Sierra 5.3l . Shutdown, after fueling. Will start and run for 2-3 seconds. Had prior cmp code with an extended crank. After shutdown evap control circuit fault became active. Both codes p0341 and p0443 are active. Truck will only start and die...One issue I have conflict with is no koeo fuel pressure. Have fuel pressure when cranking 60 psi, same fuel pressure when commanding relay or doing in balance. I see counts on both crank and cam sensor. Crank is showing rpm while cranking or when it fires , cam is showing 0 rpm all times.
Submitted: 1 year ago.
Category: GM
Expert:  Gary replied 1 year ago.

if you pull out the cam sensor and leave it plugged in while monitoring the cam rpm if you Pass a flat steel object across the tip of the sensor repeatedly will it increment on the scan tool when you do that ?