How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dr.Carz Your Own Question
Dr.Carz
Dr.Carz, ASE Certified Technician
Category: GM
Satisfied Customers: 303
Experience:  ase master tech with 12 yrs experience
35496794
Type Your GM Question Here...
Dr.Carz is online now
A new question is answered every 9 seconds

How to intall a lift gate module on a 2010 gmc terrain slt

Customer Question

How to intall a lift gate module on a 2010 gmc terrain slt 3.0l? Does it need programing or could I just install it by unplugging and removing the one in my vehicle and installing the new one?
Submitted: 1 year ago.
Category: GM
Expert:  Dr.Carz replied 1 year ago.

Mounted on backside of liftgate under trim panel very easy to replace and Yes MUST be programmed and relearned per scan tool. I do not see this function on my snap-on verus pro. To the dealer I would go probably charge 1hr labor I would not pay more. Hope this helps please remember to rate my performance and accept when satisfied.

Expert:  Dr.Carz replied 1 year ago.

Was wondering how you made out. Remember to please rate my service and accept. thank you.