GM Repair Problems? Ask GM Repair Expert Now.
I am sorry your having this problem
so basically the drivers door is electrically dead so to say ?
do you have a multi meter on hand ?
these are most common for the drivers switch assembly's going bad which replacing the switch and having the new one programmed as it is a module that needs programming installed into it for it to work should correct this problem
all that needs to be done is be sure the switch does have its 12 volts and a good ground before the switch is replaced to be sure it is the switch assembly is bad
usually if missing the 12 volts or a ground is usually a bad wire in the door jam area
if you have any questions please ask