How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary
Gary, GMC Technician
Category: GM
Satisfied Customers: 15712
Experience:  15 years gm master tech/15 years ASE master tech
19513769
Type Your GM Question Here...
Gary is online now
A new question is answered every 9 seconds

GM Montecarlo: I have a 96 Carlo and security light keeps

Customer Question

I have a 96 Monte Carlo and security light keeps popping on on the dash and sometimes it wont crank and I wait a while later then it will crack and I have already installed a inition switch
Submitted: 1 year ago.
Category: GM
Expert:  Gary replied 1 year ago.
I am sorry your having this problemdid you replace the ignition switch ( inner portion the ignition lock cylinder and case goes into ) or the ignition lock cylinder and outer ignition lock case ?
Customer: replied 1 year ago.
I replace the ignition cylinder with a lock itself
Expert:  Gary replied 1 year ago.
so the outer ignition lock was replaced as the outer ignition lock case is what has the pass lock sensor in it
Customer: replied 1 year ago.
Yes can you give me a call 404 405 -7661
Expert:  Gary replied 1 year ago.
the odds are with a new pass lock sensor the BCM is bad