How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Master Tech
Category: GM
Satisfied Customers: 12803
Experience:  ASE Master Tech, 35 years, Foreign/Domestic repairs
Type Your GM Question Here...
Randall C is online now
A new question is answered every 9 seconds

how do you change thermostat on a 1996 gmc sierra

Resolved Question:

how do you change thermostat on a 1996 gmc sierra
Submitted: 6 years ago.
Category: GM
Expert:  Randall C replied 6 years ago.
Hello, I am Randall I need to know he engine size you have. LMk thanks
Customer: replied 6 years ago.
5.7 liter
Expert:  Randall C replied 6 years ago.
No pictures offered for repair but follow the top rad hose to the engine,. Wher it connects is the thrmostat housing,. remove th hose from the housing, remove th 2 bolts, pop off housing and t stat will be sitting inside. New stat and gasket. You really dont have to drain coolant bu some will come out when you remove the housing so be prepared for this. really a fairly easy job. Just be sure housing is clean of old gasket and do not over tighten when you go back with it so as to not crack it.

  1. Drain cooling system until radiator coolant level is below thermostat.
  2. Remove thermostat housing bolts and/or studs, then the thermostat housing and thermostat.
  3. Thoroughly clean gasket surfaces of thermostat housing and intake manifold.
  4. Reverse procedure to install, noting the following:
Randall C and 3 other GM Specialists are ready to help you