How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Danny Your Own Question
Danny, GMC Technician
Category: GM
Satisfied Customers: 5064
Experience:  Fleet mech with gmc vehicles as our primary service auto's
Type Your GM Question Here...
Danny is online now
A new question is answered every 9 seconds

P1192 my truck keeps getting p0700 and p1192 hard

Customer Question

p1192 my truck keeps getting p0700 and p1192 hard
Submitted: 6 years ago.
Category: GM
Expert:  Danny replied 6 years ago.
Have you used an after market air filter? I am concened about your oil conditioning getting your sensors dirty.
Expert:  Danny replied 6 years ago.
this is just a question before we talk about your codes
Customer: replied 6 years ago.
is origal air filter and oil is clean i a master tec with kia
Expert:  Danny replied 6 years ago.

so both of these codes are related to your fuel trim banks and it is suggested that the fuel pressure reg is were to start and in worse case senerios the injectors. So a fiel pressure test in in order.

Customer: replied 6 years ago.
were do you get the inf because i check on all data and michell
Expert:  Danny replied 6 years ago.
As you know your codes are not in alldata and mitchell as i already checked there. I searched JA achieves and googled it. There is a reference to a transmission code of the p1192 but i dont think it aplies. If you look at a code chart that list all codes for obd1 or obd 2 you can find them also.
Customer: replied 6 years ago.
i check on goggle and they wher saying to check maf
Expert:  Danny replied 6 years ago.
Thats why I asked about the air filter. you would want to check the connections with a wiggle test and maybe clean with carburator cleaner and compressed air and see how it does. I think if it was the maff it would be the maff sensor code. which is 171 or 174
Customer: replied 6 years ago.
have you hat tha problem before becasu i perf a fuel injector serv and check tha connecter i was loking for some body with tha problrm
Expert:  Danny replied 6 years ago.
your fuelpressure should be around 60 pounds with ignition onand engine off. see if its losing pressure.
Customer: replied 6 years ago.
ok i will check
Expert:  Danny replied 6 years ago.
Ok good luck.