How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gary Your Own Question
Gary, GMC Technician
Category: GM
Satisfied Customers: 15521
Experience:  15 years gm master tech/15 years ASE master tech
Type Your GM Question Here...
Gary is online now
A new question is answered every 9 seconds

1988 chevy truck: reverse..parked..overdrive..shifter asembly

Customer Question

my 1988 chevy truck would no longer go into reverse! then after i parked it for a few weeks,now it wont go into overdrive ether! ive taken the shifter asembly apart and checked the universel an pins that every thing swivels on,but everything there seems fine ! whats wrong with my 5 speed other then being old!
Submitted: 7 years ago.
Category: GM
Expert:  Gary replied 7 years ago.
will it just grind when trying to put it in reverse or first gear?will it physically shift into any gear with clutch pedal pushed down?
Customer: replied 7 years ago.
when you push shifter all the way to the right- it seems like it goes as far as it used to but when you push it forward toward overdrive an let the clutch out it winds up being in 3rd gear! and as far as reverse - you can push the shifter far enough to the right but cant pull it back into reverse! its like at a grinding at all and truck still drives and shifts well in all other gears.also it use to be hard to get it in reverse when it was cold, then after it warmed up it was fine
Expert:  Gary replied 7 years ago.
ok..well if you checked the shifter pin and it was ok then something has failed in the shifter rail assembly or something has broke and is blocking the shift forks ect..that unit has to come out and the whole top assembly removed to see if its the shifter rod assembly has broken or something have eliminated the things you can do without pulling the trans out.but at this point it needs to come out and be torn down
Gary and 2 other GM Specialists are ready to help you
Customer: replied 7 years ago.
thank you! i was afraid youd say that!forgot to mention that the grease was also full but old.something broken i can understand but that doesent explain why it use to be hard to go to reverse while it was cold unless the grease had broken down! maybe i can find out more when i tear it out! love that old truck-its worth looking into! thanks again
Expert:  Gary replied 7 years ago.

Related GM Questions