How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ellen Your Own Question
Ellen
Ellen, Consultant
Category: General
Satisfied Customers: 109
Experience:  attorney and legal researcher
9968427
Type Your Question Here...
Ellen is online now
A new question is answered every 9 seconds

I have a Janome 15000 and apparently the automatic needle

Customer Question

I have a Janome 15000 and apparently the automatic needle threader has bent. The hook is there it just doesn't thread the needle. How can I fix it without lugging it to the repair shop?
Submitted: 8 months ago.
Category: General
Expert:  AARONJ1ST replied 8 months ago.

Insert a new 80/12 needle Raise the needle to its highest position. Pull down the threader and check where the threader hook is off then use a small flat head screwdriver or tweezers to reform the hook. Then your off and threading. Have a good day

Related General Questions