How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask chester298 Your Own Question

chester298
chester298,
Category: General
Satisfied Customers: 792
69243481
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

I cannot align the needle on my sewing machine

Customer Question

I cannot align the needle on my sewing machine
Submitted: 1 year ago.
Category: General
Expert:  chester298 replied 1 year ago.

Hi and welcome to Justanswer.

Initially, I need more information for me to make all things clear. You mean your needle is not go back to the center position? Did you try to set it to zigzag and then see if the needle goes back to the center.

If still, remove your face plate cover, spray aerosol lubricant (for sewing machine) do not use wd40. Then try to sew again in zigzag mode until the lubricant penetrate and your needle go back to the center.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED! If you are satisfied to my answer please don't forget to rate,,GOOD OR EXCELLENT rating and BONUS are greatly appreciated...