How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chester298 Your Own Question
chester298
chester298,
Category: General
Satisfied Customers: 792
69243481
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

I got water into the coffee bean holder and now it won't

Customer Question

I got water into the coffee bean holder and now it won't make coffee
Submitted: 1 year ago.
Category: General
Expert:  chester298 replied 1 year ago.

Also what happen when you try to brew coffee? Also please try to dispense water only. Let me know if there is water coming out or its just like strange noise?

Expert:  chester298 replied 1 year ago.

Hi and welcome to Justanswer.

Initially, may I know what is the make and model of your machine?

Also what happen when you try to brew coffee? Also please try to dispense water only. Let me know if there is water coming out or its just like strange noise?

Please let me know,

Chester

Customer: replied 1 year ago.
It does release just water.
Expert:  chester298 replied 1 year ago.

Thanks for your quick response.

If the water is coming out then your problem is blockage on the coffee bean grinder you need to disassemble the grinder to remove the blockage. It because that you put water in the grinder so the coffee is become harder.

Please let me know if you still have questions.

Hope it helps.

IMPORTANT: RATING IS REQUIRED! If you are satisfied to my answer please don't forget to rate,,GOOD OR EXCELLENT rating and BONUS are greatly appreciated...

Customer: replied 1 year ago.

I am not able to easily disassemble the grinder. Do you have any specific information regarding this particular type of machine? Do you have the steps I need to follow in order to get to where the blockage likely is?

Expert:  chester298 replied 1 year ago.

Ok I will try to find the grinder diagram here.

Please give me your machine make and model.

The blockage is usually on the grinder gate where the ground coffee exit.

Customer: replied 1 year ago.
Jura impressa a9
Expert:  chester298 replied 1 year ago.

Unfortunately, there is no diagram on my shop of your machine model.

I will check for the other areas here and I will get back to you tomorrow.

I will opted out for now.