How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask BestOne1943 Your Own Question

Category: General
Satisfied Customers: 56
Type Your Question Here...
BestOne1943 is online now
A new question is answered every 9 seconds

Display shows po1 and will not function

Customer Question

display shows po1 and will not function
Submitted: 1 year ago.
Category: General
Expert:  BestOne1943 replied 1 year ago.

Sorry but I need further info. What is the make and model and is this a unit that has been working or did you just plug it in??

Customer: replied 1 year ago.

samsung er 5215, it had been working for several years

Expert:  BestOne1943 replied 1 year ago.

I can help as I am a SAM4 dealer, the 01 error is a general error, sucu as pressing the subtotal key before anything has been entered or pressing any function key that doesn't follow the correct procedure. What was the last operation? Have you tried an "Initial Clear"? In my manual it is on page 14. Turn the key to "p", turn the machine off. Press and hold the "Subtotal key while turning it back on. Continue holding it until the reg prints "Initiial Clear" Now sign on a clerk as the display will say "closed" until you sign on a clerk,,,,, 1 and the clerk key.

Expert:  BestOne1943 replied 1 year ago.

Does this help?

Customer: replied 1 year ago.

by the time you got back to me I had left work. When we came in this morning and plugged it back in it work. The problem was power fail, leaving it unplugged over night must have fixed it.

Expert:  BestOne1943 replied 1 year ago.

Hmmm... Try that initial clear procedure so that you know how to do that in the future any lock up will be cleared by the initial clear. I guess some sort of power glitch could've caused it to seemingly lock up but initial clear will clear almost 95% of errors that you encounter with that register but remember you have to sign on a clerk afterwards ...Good luck to you,