How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask chester298 Your Own Question
chester298
chester298,
Category: General
Satisfied Customers: 792
69243481
Type Your Question Here...
chester298 is online now
A new question is answered every 9 seconds

I can't get the following message off the screen "Raise the

Customer Question

I can't get the following message off the screen "Raise the needle bar slowly" I have a Janome 300E
Submitted: 1 year ago.
Category: General
Expert:  chester298 replied 1 year ago.

Hi and welcome to Just answer.

Initially, remove your face plate cover/shell then use compress oil and blow that area. Do this repeatedly and raise your needle bar and lower it multiple times then restart your machine.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED! If you are satisfied to my answer please don't forget to rate,,GOOD OR EXCELLENT rating and BONUS are greatly appreciated...

Expert:  chester298 replied 1 year ago.

Hi

I'm just following up with you to see how everything is going. Did my answer help?

Let me know,
Chester

Expert:  chester298 replied 1 year ago.

Hi

I'm just following up with you to see how everything is going. Did my answer help?

Let me know,
Chester