How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Martin Your Own Question

Martin, Engineer
Category: General
Satisfied Customers: 4779
Experience:  i'm 41 and i never stopped studying and experimenting
Type Your Question Here...
Martin is online now
A new question is answered every 9 seconds

Im looking for a Chipping hammer with Cone and cross chisel

This answer was rated:

I'm looking for a Chipping hammer with Cone and cross chisel peens for use in rust assessment in Marine survey
Hello and welcome. I am not having much luck in finding one for your precise working environment. I assume you need corrosion proof material as in salt water.

The closest thing i found in searching for such an item in stainless steel is that chisel that could be turned into what you want with minimum machining and installing a fiberglass handle on it:

Other that this, you could contact and have to manufacture one to your specific requirement.
Martin and 46 other General Specialists are ready to help you

Related General Questions