How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Cher Your Own Question

Cher, Educator-40+ yrs
Category: General
Satisfied Customers: 20851
Experience:  M.A., B.A., Author, Information & Research Specialist
Type Your Question Here...
Cher is online now
A new question is answered every 9 seconds

How do I fold the hood into the collar on an Army gortex cold

Resolved Question:

How do I fold the hood into the collar on an Army gortex cold weather jacket?
Submitted: 4 years ago.
Category: General
Expert:  Cher replied 4 years ago.
Hello, and welcome to Just Answer.

The instructions may vary according to which brand you have, but try this:

Take the visor portion of the hood and fold it under and under itself, forming a collar (make sure you practice, to get an even, flat roll). Then take the tab at the outside back of the neck and fold it over the newly formed collar. Put the tab through the loop on the inside back of the neck and attach it to itself. If the jacket does not have a tab in the neck, the tab is under the visor. All you do is take the tab from the back of the hood, fold the visor back, insert the tab and pull it back on itself to close with the velcro.

If you need additional information, please let me know by clicking 'Reply'.

If you have found this answer helpful, please click 'ACCEPT', as this is the only way I am compensated for assisting you today (although you have made a deposit/have a subscription, no payment is released to the Expert until you click 'Accept').

Positive Feedback and Bonuses are always welcomed and appreciated.

Best regards,
Cher and 24 other General Specialists are ready to help you

Related General Questions