How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 2005 ford f350 4x4 vehicle will not go into 4wheel

Customer Question

Hello again I have a 2005 ford f350 4x4 vehicle will not go into 4wheel dr or 4 wheel low all the indicators show it going into 4 wheel all the linkage is connected and moving properly ft hubs lock ok any suggestions before I remove front dr shaft to see if the problems in the transfer case Thanks dom
Submitted: 4 months ago.
Category: Ford
Expert:  john -aka eauto replied 4 months ago.

does the frt driveshaft engage

Customer: replied 4 months ago.
Expert:  john -aka eauto replied 4 months ago.

so the frt shaft engages and the hubs lock but no*****/p>