How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

Hard time getting air out of clutch after replacing line

Customer Question

hard time getting air out of clutch after replacing line between res & cyl
JA: How many miles are on the clutch? Has it been slipping or sticking?
Customer: no. clutch fine before line change... plastic line got very cold and burst...replaced line only
JA: What is the model/year of your Ford?
Customer: 1984 f350 2 wd 460 v8
JA: Are you fixing your F350 yourself? What have you tried so far?
Customer: self... tried open bleeder valve when manually depressing clutch @ bell housing., holding in , then close valve & release. no pressure yet
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 15 days ago.
Category: Ford
Expert:  Peter Bagley replied 15 days ago.

Hello and welcome to just answer, my name is ***** ***** master tech. I cannotsee or hear your vehicle so I rely on your input to my questions so I can help you better. I read your notes what you have done so far and have a question before we start. When you opened the bleeder at the slave cylinder did any fluid come out?