How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23821
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a 1997 Ford E150 van with the 5.4L V-8. I removed the

Customer Question

I have a 1997 Ford E150 van with the 5.4L V-8. I removed the intake manifold so I can install a new L-shaped rigid heater tube which is located near the #4 spark plug, in the manifold. In spite of my tapping on the tube's flange, it's certainly not sliding in the manifold hole. Any suggestions? I thought about applying heat, but haven't yet.
Submitted: 5 months ago.
Category: Ford
Expert:  Jaybird61 replied 5 months ago.

Hi, My name is***** you have a picture you can send me of the pipe and location you are installing?