How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask roy Your Own Question
roy
roy, import/domestic specialest
Category: Ford
Satisfied Customers: 5298
Experience:  ASE master tech for 40 years
3506196
Type Your Ford Question Here...
roy is online now
A new question is answered every 9 seconds

Having the same problem. Lots of new parts thrown at it. ICP

Customer Question

Having the same problem. Lots of new parts thrown at it. ICP ,IPR, fuel pump, glow plugs ,Electric valve cover gaskets ,fuel filter, replaced both injector sylinoids and still will crank but no start?
Submitted: 5 months ago.
Category: Ford
Expert:  roy replied 5 months ago.

hello, my name is ***** ***** I will be glad to assist you. please allow me a couple of minutes to gather some basic info.

Roy

Expert:  roy replied 5 months ago.

ok, do you have any stored codes???

do you have a scan tool that can read the high pressure oil pump???

Roy

Customer: replied 5 months ago.
No codes and no scan tool for oil pump
Customer: replied 5 months ago.
Any other suggestions on what it could be without me purchasing the scan tool
Expert:  roy replied 5 months ago.

ok, the high pressure oil pump needs to be checked. without the proper pressure it will not start.

the FICM could also be the issue but once again, you need a scan tool to do the tests.

both are common failures and are expense. at this point it is a guess with confirmation from testing.

Roy

Customer: replied 5 months ago.
What is the Ficm sorry not familiar with that
Expert:  roy replied 5 months ago.

fuel injection control module. it is located on drivers side under the hood above and behind tire in fender well.

Roy

Customer: replied 5 months ago.
OK so would an obd2 scan tool be able to check the oil pump
Expert:  roy replied 5 months ago.

yes, it will show the pressure and will give info on the FICM as well.

Customer: replied 5 months ago.
OK I will see if I can get a hold of one and get back with you thanks
Expert:  roy replied 5 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Expert:  roy replied 5 months ago.

please dont forget to rate me as it is the only way I get paid for my efforts

Roy

Customer: replied 5 months ago.
Purchased a scanner would not connect to truck checked fuses nothing was blown. Changed ICP sensor and crank sensor again and it started
Expert:  roy replied 5 months ago.

again?? these wre change as per your post.

what brand did you originally use???

what kind of scanner??

Customer: replied 5 months ago.
again last time it only ran for the one day then wouldn't start the next day and purchased a Innova brand obd2 scanner (will read my husband's truck )
Expert:  roy replied 5 months ago.

ok, can it read all the engine functions on the other truck???

Roy

Customer: replied 5 months ago.
it does his is a 97 f350 7.3
Expert:  roy replied 5 months ago.

did you see what th high pressure oil pump reading was??? that is what you should have

ok, does the scanner even light up???

Expert:  roy replied 5 months ago.

are we done???

Customer: replied 5 months ago.
Sorry I work 3 jobs trying to figure things out as I can
Expert:  roy replied 5 months ago.

ok

please dont forget to rate me as it is the only way I get paid for my efforts

Roy