How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Ford
Satisfied Customers: 44511
Experience:  16 years experience
2499435
Type Your Ford Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Trying to pinpoint sjb as fault. both sneders are in spec

Customer Question

trying to pinpoint sjb as fault. both sneders are in spec and gauge sweeps with scanner. all wiring good
Submitted: 25 days ago.
Category: Ford
Expert:  Chris (aka- Moose) replied 25 days ago.

Welcome, I'm Chris (aka Moose), my normal schedule online is around lunch and after dinner till early morning.

Can I assume your trying to diagnose a fuel gauge not working?

Chris

Customer: replied 25 days ago.
Ya stops at half
Expert:  Chris (aka- Moose) replied 25 days ago.

Does the SJB register the fuel level correct when scanned?

Customer: replied 25 days ago.
New cluster, left and right senders, new sJB all replace
Expert:  Chris (aka- Moose) replied 25 days ago.

Does the SJB register the fuel level correct when scanned?

Customer: replied 25 days ago.
Have a verus . Not at the shop now so can't look. can't see both sides on data, can't remember
Customer: replied 25 days ago.
I think it's about the same as what is being displayed on gauge
Expert:  Chris (aka- Moose) replied 25 days ago.

The only thing which should be left based on the repairs you have made should be the wiring. However I would expect the gauge to show full or empty at all times not just work from a half tank on down. Would you like the Ford diag steps for this concern?

What now

  1. You have asked a question.
  2. You have paid a deposit and received an info request and or answer(s).
  3. Now it is time to follow up if needed or rate my answer, hopefully 5 STAR EXCELLENT. Sometimes the rating fails, responding with (I am a pleased) will suffice.
  4. You are more than welcome to still follow up. I want you pleased with me and my answer(s).

Thanks for using Just Answer, and rating me so I am compensated, Chris

Expert:  Chris (aka- Moose) replied 21 days ago.

Hello again Chris here,

  • Sorry you were not pleased with my help.
  • What would you like to do regarding your question now.
  • This post is coming up on the 7 day mark where it times out. When a post times out, that means it's no longer on my active list (you reply and I may never know it.)

Thanks Chris