How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

P0354. Coil has been tested and is firing: a spark plug was

Customer Question

p0354. Coil has been tested and is firing: a spark plug was attached to the cam cover with the coil and was observed firing, but the P0354 code is present and the cylinder is missing, presumably because the PCM has disabled the injector because of the P0354 code. SIA Electronics says the PCM/ECM is good.
JA: Just to clarify, what's the exact code? And have you tried to reset it?
Customer: What is not clear about P0354?
JA: What is the model/year of your Ford?
Customer: 2007
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: 2007 Fusion, 3.0 engine. Sent the ECM to be repaired and replaced/substituted the coil.
JA: Anything else you want the mechanic to know before I connect you?
Customer: ECM was sent back to SIA Electronics who say there is nothing wrong with it.
Submitted: 20 days ago.
Category: Ford
Expert:  Wayne Crawford replied 20 days ago.

Hello. My name is ***** ***** I will be helping you today.

Do you have a test light or multimeter to do some testing"?

Customer: replied 20 days ago.
both.
Expert:  Wayne Crawford replied 20 days ago.

Start by load testing the wiring at the coil by hooking up a headlight bulb or something to the two wires then use your meter and check the voltage across the two wires to make sure they maintain about battery voltage with a load on them.