How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

I received four error codes today and I am at a loss for

Customer Question

I received four error codes today and I am at a loss for what thy mean! the codes are 9318, d900, 9352 9317. can you help ? please e-mail me at***@******.***
JA: How many miles are on the car? Do you have scan tool or a code reader?
Customer: 270,00 miles, and the codes came up on the dash.
JA: What is the model of your '00 Ford?
Customer: 05 expl. xlt
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: yes just started today and I am fixing it my self. I have replace the front wheel barrings and the right rear sup. system then found that the left was replaced with a hud ass. that was not a adv. trac and am tring to locate one at the present.
JA: Anything else you want the mechanic to know before I connect you?
Customer: yes. the adv. trac , abs, air bag seriive engine lights are on.
Submitted: 6 months ago.
Category: Ford
Expert:  Ron replied 6 months ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Expert:  Ron replied 6 months ago.

All Ford Fault codes start with either a P and or B , are you sure these are actual fault codes?

What size engine do you have?

Customer: replied 6 months ago.
4.0 l
Customer: replied 6 months ago.
no I do dot have that much time
Expert:  Ron replied 6 months ago.

Are the codes your getting P or B codes?

Customer: replied 6 months ago.
there were on the dash where the mileage is saposed to be.
Expert:  Ron replied 6 months ago.

These are not valid codes, in order to retrieve any fault codes you need to connect a scan tool to the data link connector. Most auto part stores such as Auto Zone will run a scan for you at no charge. If you can get this done and post back with them I can direct you from there.