How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Ford
Satisfied Customers: 23001
Experience:  23 years with Ford specializing in drivability and electrical and AC. Ford certs and ASE Certs
7276279
Type Your Ford Question Here...
Ron is online now
A new question is answered every 9 seconds

2000 ford f150. The actuator for the blend door has no

Customer Question

2000 ford f150. The actuator for the blend door has no power. I have changed the temperature control switch in the cluster on the dash. Is there a fuse or relay to check
JA: How many miles are on the car? Has the car been starting normally?
Customer: It starts and runs fine, the milage is about 166,00
JA: What is the make/model of your car?
Customer: 2000 ford 150
JA: Are you fixing your E150 yourself? What have you tried so far?
Customer: yes, myself. The original actuator was broken so I replaced it. It would not work so I tested the wires and found nothing so I changed the switch and still nothing
JA: Anything else you want the mechanic to know before I connect you?
Customer: Not that I can think of
Submitted: 1 month ago.
Category: Ford
Expert:  roy replied 1 month ago.

hello, my name is ***** ***** I will be glad to assist you. please allow me a couple of minutes to gather some basic info.

Roy

Expert:  roy replied 1 month ago.

ok, looking at diagrams.

did you check all the fuses?? does the ac work ok with all the controls???